Quilter Labs TT12 Travis Toy 800W 1x12 Steel Guitar Amp Stack

Tone Block 202
Power Output: 450W @ 8 ohms, 800W @ 4 ohms
Frequency Response: band-limited to 25Hz-15kHz.
AC Power Req.: IEC inlet, universal 100-240Vac, 50-60Hz, 250W typical, 1000W peak.
Input Connections: 1/4-inch unbalanced, 2 meg, 4V peak. Switchable Mute, Passive, or Active (10dB pad).
Line Input: XLR 10K balanced, 1V full scale.
Effects Loop: Series, pre-Master, 1V full scale.
Effects Send: 1/4 inch unbalanced, 1K.
Effects Return: 1/4 inch unbalanced, 47K (1K if FX Send is not used).
Switchable Sig Out: Balanced Line Pre-Master, or Mono Headphone Post-Master.
Line Out: 1.6V full scale, quasi-balanced 39 ohms each leg.
Headphone Out: Up to 3.3V full scale depending on Master Volume
XLR Line Input: Post pre-amp, Pre-Master, 1.3V FS, 4.4K balanced
Speaker Output: 4-8 ohms, 90V, 25A, peak dual Speakon Combo ¼-inch jacks.
Dimensions: 8.5” x 7.9" x 3" (218 x 201 x 76mm)
Weight: 3.7 lb. (1.6kg)
Speaker cab
Power handling: 300W
Speaker: 1x12" Eminence Travis Toy Double T 12
Nominal Basket Diameter: 12”, 305 mm
Nominal Impedance: 8 ohm
Resonance (Fs): 53 Hz
Usable Frequency Range: 50 Hz – 3.8 kHz
Sensitivity: 100.2 dB
DC Resistance (Re): 5.6 ohm
Magnet Weight: 11 oz.
Gap Height: 0.36”, 9.1 mm
Voice Coil Diameter: 3”, 76 mm
Dimensions: H 16 inches (40.64 cm) x W 18.25 inches (47 cm) x D 10.75 inches (27.3 cm)
Weight: 27 lb. (12.25 kg)
Included Accessories:
Aluminum amplifier retention plate
Laser-engraved Travis Toy 12 tiltback legs pre-installed
Ballistic nylon cover
Right-angle speaker cable
Travis Toy 12 Product badge